Rhythm Recognition Light RGB Audio Led
Specification:
Voltage: DC 5V/1A
Charging: type c
Material: Aluminum Alloy
Light beads: 32 LEDS/40 LEDS/3D per light bar
Color: multicolor
DIY function
you can pick up your own favorite color
Time setting
you can set time on/off any time u want
RGB Sound control LED light app control pickup voice activated rhythm lights color ambient LED light bar of music Ambient Light
-
By microphone pickup (Sound Control). Aluminum alloy integrated molding housing.
-
Mono 32 segment widening lights to ensure adequate dynamic range and fine enough. Exclusive custom widening lights strip. (There are no similar lights in the market).
-
The rising speed and the falling speed of the light bar, the holding time and the falling speed of the peak can be adjusted separately.
-
Microphone sensitivity can be adjusted 30 levels. The reaction speed of AGC can be adjusted 30 levels.
-
Super wide range of AGC adaptive algorithm to ensure the best effect. Single button operation
Material: ABS + electronic components
color: gray
Size: 181*16*18.5mm
Features:
Built-in highly sensitive microphone (voice control)
32 colorful lamp beads
No less than 8 display modes
4 levels of brightness adjustable
5-level speed adjustable
18 color modes adjustable
Comes with AGC automatic gain control
Exclusive intelligent de-noising algorithm, can be used in noisy environment
Product parameters:
Input voltage: >DC 5V 1A
Input interface: MicroUSB
Frequency response: 50-16KHZ
Dimensions (length, width and height): 181*16*18.5mm
Net weight: 86g
Optical characteristics (wavelength):
Red: 620-625nm
Green: 520-525nm
Blue: 460-470nm
Optical characteristics (brightness)
Red: 450-550mcd
Green: 1300-1500mcd
Blue: 350-400mcd
Instructions:
MODE/SPEED key: Short press to turn white-select mode; long press to turn red-select 5 speeds
COLOR/BRIGHT key: Short press to turn white-select color; long press to turn green-select 4 levels of brightness
Press two keys at the same time: Press at the same time to turn blue-to learn the environmental noise spectrum
Press and hold COLOR at the same time when power on: enter gain setting mode
Power on (battery model only): Press the COLOR key after power off
Shut down (battery model only): keep face down for 3 seconds
Packing list ：